Oxford Quarry Fieldstone - Veneer

[MuirView Design]

Does anyone know of a manufacturer that carries something by this name? Customer thought it may be United Stone Veneer, but I don't see anything like that on their website. Below is a photo...I just need to match the veneer on the house to the step risers. Thanks.

[custom patios]

when was the veneer installed?

[MuirView Design]

Been about 2 years Steve.

[Mbella]

Adam, did the builder install the veneer? Looks like a Quality Stone product to me.

[mrusk]

I assume this house was built by a production builder. I assume they got the oxford quarry fieldstone name off the paper work when they bought the house.

So here is what you do. If the builder did not go bankrupt already he must have another development going up somewhere in the area. Go to the model house. They will have a million different sample boards for all the options of the house. There you will find the stone.

[Mbella]

Adam, I was going where Matt went. That's the number one option. However, if that doesn't work...check this out.... http://www.qualitystoneveneer.com/ColorDetailEx.aspx?Color=8 Change the option to fieldstone and pull it up on top of the image you posted. For a stoop, no doubt it will work.

[4seasons]

Look at www.dutchqualitystone.com and go under fieldstone there are a couple that will match nicely.

[mrusk]

Adam what are you veneering the top of the stoop with? It might just make more sense to just that same material. If you bulding a 6" step with 2" treads, you end up seeing less then 4" of the material. That doesn't look to good.

[MuirView Design]

We're using thermal bluestone for the treads. Not a bad idea to wrap the risers with bluestone as well.

We are wrapping a second step all the way around as well